MR
Non through-hole compact rotary hydraulic cylinder
- Light weight and short form design can reduce the spindle loading for vertical lathe application.
- Built-in check valve and proximity switch brackets. In case of power failure occur which prevents the workpiece from flying out.
- Developed for rear locking installation.
Specification
UNIT : mm
SPEC Model |
Piston Dia. (mm) |
Piston Area (cm2) Push Side / Pull Side |
Max. Draw Bar Force KN(kgf) Push Side / Pull Side |
Piston Stroke (mm) |
Max. Operating Pressure MPa (kgf / cm2) |
Max. Speed (r.p.m.) |
Moment Of Inertia I (kg‧m2 ) |
Weight (kg) |
Total Leakage L/min |
---|---|---|---|---|---|---|---|---|---|
MR12535 | 125 | 117 / 107.5 | 49(4996) / 45(4588) | 35 | 4.5(45.9) | 6000 | 0.028 | 9.5 | 0.8 |
MR15035 | 150 | 171.1 / 156.7 | 72(7342) / 66(6730) | 35 | 4.5(45.9) | 5500 | 0.043 | 12.8 | 0.8 |
MR20060 | 200 | 310 / 286 | 146(14887) / 134(13664) | 60 | 4.9(50) | 5000 | 0.55 | 49 | 2 |
MR25060 | 250 | 481.5 / 453.6 | 227(23147) / 214(21822) | 60 | 4.9(50) | 2000 | 0.81 | 72 | 2 |
DIM Model |
C | C1 | D1 | D2 | E (h7) |
F | G | H | J | L | M | N1 | N2 | P max. |
P min. |
Q1 | Q2 | R | T | Z |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MR12535 | 169 | 171 | 150 | 130 | 110 | 35 | 25 | M24x3.0 | 44 | 174 | 94 | PT 3/8'' | PT 1/4'' | 57 | 22 | 6-Ø11 | 6-M12 | 162 | 82 | 5 |
MR15035 | 202 | 204 | 180 | 130 | 110 | 110 | 45 | M30x3.5 | 45 | 175 | 95 | PT 3/8'' | PT 1/4'' | 61 | 26 | 6-Ø13 | 12-M12 | 163 | 82 | 5 |
MR20060 | 250 | 225 | 225 | 145 | 120 | 55 | 37 | M36xP4.0 | 60 | 270 | 156 | PT 1/2'' | PT 1/2'' | 85 | 25 | 6-Ø17 | 6-M16 | 255 | 140 | 6 |
MR25060 | 300 | 305 | 275 | 220 | 160 | 65 | 44 | M42xP3.0 | 60 | 280 | 168 | PT 1/2'' | PT 1/2'' | 85 | 25 | 6-Ø17 | 6-M20 | 265 | 150 | 6 |