V(40"-79")

Large wedge type non through-hole power chuck (adapter excluded)

  • Chucking operations of very large components external or internal clamping.
  • Suitable for vertical lathe, due to the front protection of slide way.
  • Master jaw with manual radial setting function.
Large wedge type non through-hole power chuck (adapter excluded)
Large wedge type non through-hole power chuck (adapter excluded)
UNIT : mm
SPEC
Model
Jaws Plunger
Stroke
(mm)
Radial Jaw
Stroke
+(Manual setting)
(mm)
Max.
Pull
Force
(kn)
Max.
Gripping
Force
(kn)
Max.
Operating
Pressure
(kgf / cm2)
Max.
Speed
(r.p.m.)
Weight
(kg)
Moment
Of Inertia
I
(kg‧m2 )
Matching
Cylinder
Matching
Hard Jaw
Matching
Soft Jaw
Gripping
O.D. Range
(mm)
40"V-240 3 57 23 + (30) 180 320 42.8 630 645 82 MS250C HJ40-1 HC40-1 Ø285-Ø105
 VIT-240 4 550 700 89
50"V-250 3 57 23 + (30) 180 320 42.8 500 890 168 MS250C HJ40-1 HC40-1 Ø270-Ø1250
 VIT-250 4 400 94 177
 VE-250 6 360 971 183
63"VIT-263 4 60 24 + (40) 200 360 46.9 300 1700 518 MS250C HJ40-1 HC40-1 Ø390-Ø1600
 VE-263 6 280 1800 548
79"VE-279 6 60 24 + (40) 200 360 46.9 230 2850 1350 MS250C HJ40-1 HC40-1 Ø440-Ø2000
DIM
Model
A B C D
max.
H J K L M N
max.
O P
max.
P
min.
Q R S T U
40"V-240 1005 180 520 502 463.6 108 M24 M52x1.5 8 457 30 59 2 4 7-M24 19 85 72
 VIT-240
50"V-250 1250 180 520 623 463.6 108 M24 M52x1.5 8 563 30 59 2 4 10-M24 19 85 72
 VIT-250
 VE-250
63"VIT-263 1600 220 720 796 647.6 144 M30 M52x1.5 8 738 40 82 22 6 13-M24 22 110 72
 VE-263
79"VE-279 2000 238 720 996 647.6 159 M30 M52x1.5 8 914 40 100 40 6 17-M24 22 110 72