NHT-200

2-jaw and 3-jaw through-hole power chuck (adapter included)

  • Gripping of round or irregular workpiece does not need to change the chuck.
  • The chucks are designed according to ASA B5.9 type A spindle.
  • The chucks are made from high grade alloy steel. All sliding surfaces are hardened and ground to increase running accuracy and longer service life.
2-jaw and 3-jaw through-hole power chuck (adapter included)
2-jaw and 3-jaw through-hole power chuck (adapter included)
UNIT : mm
SPEC
Model
Through
-Hole
(mm)
Plunger
Stroke
(mm)
Jaw
Stroke
(In Dia.)
(mm)
Max. Pull Force
(kn)
3 Jaw / 2 Jaw
Max. Gripping Force
(kn)
3 Jaw / 2 Jaw
Max. Operating
Pressure
(kgf / cm2)
3 Jaw / 2 Jaw
Max.
Speed
(r.p.m.)
Weight
(kg)
Matching
Cylinder
Matching
Hard Jaw
Matching
Soft Jaw
NHT-208A5 Ø52 16 7.4 2243 / 1495 5812 / 3875 17.2 / 12.1 3500 25.2 M1552 HJ06 HC08-1
NHT-208A6 Ø52 16 7.4 2243 / 1495 5812 / 3875 17.2 / 12.1 3500 24.7 M1552 HJ06 HC08-1
DIM
Model
A B C
(H6)
D E F G H J K L M N
max.
O
max.
O
min.
P
max.
P
min.
Q R S T U
max.
V W X Y Referenoe
NHT-208A5 210 113 170 20 23 82.563 133.35 104.78 13 6xM12 52 5 41.8 34 7.5 37.5 21.5 2 12 20.5 35 M60x2 6xM10 66 37 73 Fig-2
NHT-208A6 210 107 170 20 17 106.375 150 133.35 17 6xM12 52 5 41.8 34 7.5 31.5 15.5 2 12 20.5 35 M60x2 3xM6 66 37 73 Fig-1